Well Barrier & Isolation Tools

RUNNING TOOL

Description

The Fury Hydraulic Setting Tool is designed to set bridge plugs, cement retainers and packers using the work string, production tubing or coil tubing. No rotation is required making it suitable for coil tubing and horizontal applications.
Circulate ball down to Fury 20 HST, apply required pressure from the surface and disconnect. The tubing will automatically drain coming out of the hole.
The Fury 20 requires 3,482 PSI at the tool to shear a 50,000 pound stud (7” & larger casing). A lower disconnect pressure (PSI) can be obtained by adding a 3-stage conversion kit. This will reduce your pressure to 2,321 PSI at the tool to shear the same 50,000 pound shear stud. The Fury 20 HST accepts most wireline adapter kits commonly used on a Baker No. 20 Wireline Pressure Setting Tools.

Description

The Fury Hydraulic Setting Tool is designed to set bridge plugs, cement retainers and packers using the work string, production tubing or coil tubing. No rotation is required making it suitable for coil tubing and horizontal applications.
Circulate ball down to Fury 20 HST, apply required pressure from the surface and disconnect. The tubing will automatically drain coming out of the hole.
The Fury 20 requires 3,482 PSI at the tool to shear a 50,000 pound stud (7” & larger casing). A lower disconnect pressure (PSI) can be obtained by adding a 3-stage conversion kit. This will reduce your pressure to 2,321 PSI at the tool to shear the same 50,000 pound shear stud. The Fury 20 HST accepts most wireline adapter kits commonly used on a Baker No. 20 Wireline Pressure Setting Tools.

PERMANENT INFLATE

Applications

Plug and abandonment (P&A's) with cement squeeze option
Zonal isolation in open or cased hole conditions
Base for cement in open hole side-tracking operations
Shut-off lost-circulation zones
Water Shutoff
Depleted zone abandonment

Features

Can be configured with a dual-flapper valve system rated to 5,000psi
Incorporates a robust Inflation Valve System
Adaptable to a wide variety of inflation element sizes
Disconnect release mechanisms can be configured for right hand release,
direct pull release, hydraulic pressure shear or ON/OFF tool
Inflation element construction designed to maximize anchoring for optimal differential
pressure holding capability while maintaining an effective bi-directional seal
Self-anchoring to maximum rated differential pressure capacity
Large expansion capability – up to 3 times uninflated diameter
Conveyed on Coiled Tubing or Workstring

Applications

Plug and abandonment (P&A's) with cement squeeze option
Zonal isolation in open or cased hole conditions
Base for cement in open hole side-tracking operations
Shut-off lost-circulation zones
Water Shutoff
Depleted zone abandonment

Features

Can be configured with a dual-flapper valve system rated to 5,000psi
Incorporates a robust Inflation Valve System
Adaptable to a wide variety of inflation element sizes
Disconnect release mechanisms can be configured for right hand release,
direct pull release, hydraulic pressure shear or ON/OFF tool
Inflation element construction designed to maximize anchoring for optimal differential
pressure holding capability while maintaining an effective bi-directional seal
Self-anchoring to maximum rated differential pressure capacity
Large expansion capability – up to 3 times uninflated diameter
Conveyed on Coiled Tubing or Workstring

RETRIEVABLE INFLATE

Applications

Permanent and temporary abandonment
Zonal isolation operations
Shut off lost circulation zones
Bottom Hole Shut off operation in Open or Cased hole conditions
Tubing/casing isolation for wellhead change-out

Features

Various configurations can be conveyed, set and retrieved on DP, CT, Capillary Tube
Equalization feature allowing any potential pressure across the packer to be equalized
Can be deployed and retrieved in both saturated and depleted conditions
Ball free setting, equalization and retrieval mechanisms
Adaptable to a wide variety of inflation element sizes
Inflation element construction features an external steel wire reinforcement layer
to maximize bi-directional anchoring whilst maintaining bi directional sealing for
optimal differential pressure capability
Suitable for Cased and Open hole
High expansion capabilities

Applications

Permanent and temporary abandonment
Zonal isolation operations
Shut off lost circulation zones
Bottom Hole Shut off operation in Open or Cased hole conditions
Tubing/casing isolation for wellhead change-out

Features

Various configurations can be conveyed, set and retrieved on DP, CT, Capillary Tube
Equalization feature allowing any potential pressure across the packer to be equalized
Can be deployed and retrieved in both saturated and depleted conditions
Ball free setting, equalization and retrieval mechanisms
Adaptable to a wide variety of inflation element sizes
Inflation element construction features an external steel wire reinforcement layer
to maximize bi-directional anchoring whilst maintaining bi directional sealing for
optimal differential pressure capability
Suitable for Cased and Open hole
High expansion capabilities

COMPOSITE BRIDGE PLUG

Features

Consistent drill times of 30 minutes or less
Can be converted to a Ball Drop plug, Bridge Plug, Flo-Back
Set on wireline, coiled tubing or production tubing using conventional setting tools
Milled-out using coiled tubing or power swivel
Millable cast iron slips
Positive lock-up feature to ensure plugs do not spin while milling
Utilizes conventional setting tools
Patented precision shearing device
Unique pump-down element design requires less fluid and pump pressure to deploy
plug horizontally
Efficient wireline deployment speeds of up to 450 feet per minute
Custom O.D. plugs are available upon request
Patent pending technology

Features

Consistent drill times of 30 minutes or less
Can be converted to a Ball Drop plug, Bridge Plug, Flo-Back
Set on wireline, coiled tubing or production tubing using conventional setting tools
Milled-out using coiled tubing or power swivel
Millable cast iron slips
Positive lock-up feature to ensure plugs do not spin while milling
Utilizes conventional setting tools
Patented precision shearing device
Unique pump-down element design requires less fluid and pump pressure to deploy
plug horizontally
Efficient wireline deployment speeds of up to 450 feet per minute
Custom O.D. plugs are available upon request
Patent pending technology